agentos.guide › blog
Inside your Agent OS, hermes agent microsoft office work is handled by one bundled skill that turns a plain request into a finished Word, PowerPoint or Excel file, built offline and checked before it reaches you.
This guide gives you a quick start, five prompts to paste into your agent, and a weekly routine for the documents you make again and again.
Every command and file name comes from the skill's own documentation page, so you can check each step against the source.
If you would like help mapping your own document jobs to an agent, book a free SEO strategy session with my team.
Your Agent OS already runs Hermes, a gateway and the profiles you use every day.
The microsoft-office skill is one more capability those profiles can call on, and it is installed by default under productivity.
It writes and reads .docx, .pptx, .xlsx and .csv files with python-docx, python-pptx and openpyxl, so no Office install is involved.
Since the v0.23.0 release on 5 November 2026, Word, PowerPoint and Excel are covered by this single skill instead of three.
Members of the AI Profit Boardroom get the installable Agent OS, so the gateway and base profiles are in place before you add document jobs.
hermes update
command -v soffice || command -v libreoffice
hermes pm environment documents --extra documents --extra documents-pdf
hermes curator lock microsoft-office
Update first, so you are on v0.23.0 or the v0.23.1 patch, and delete any old per-format Office skills an upgrade left behind.
The second line tells you whether LibreOffice is present, which you need for PDFs, recalculation and slide previews.
The third builds the shared, version-pinned Python environment the skill uses; the skill will also do this on its own the first time it runs.
Run the last line only once your outputs look right, because it stops the agent from rewriting the skill.
If your terminal backend is the Hermes Docker image, the libraries are already inside it.
| Format | Good jobs | Watch for |
|---|---|---|
| Word .docx | Letters, reports, contracts, token templates, tracked changes, comments | Fields such as page numbers fill in on open |
| PowerPoint .pptx | Pitch decks, brand-template decks, chart refreshes, speaker notes | Render and check slides; fonts can be swapped |
| Excel .xlsx, .csv | Multi-sheet workbooks, formulas, charts, CSV conversion | Formulas need a recalc to show values |
| .doc, .ppt, .xls | Convert first with LibreOffice | Not opened directly |
| .odt, .odp, .ods | Out of scope | Use another tool |
Use this when you have rough notes and need a tidy Word file.
Use the microsoft-office skill. Load the Word reference first.
Turn the notes below into a two-page client report as a .docx.
Use headings for each section and a short summary at the top.
Save it to ~/reports/october-report.docx.
Then re-read it with docx_read.py --text and tell me the headings you found.
[paste notes]
The last line matters.
The docs tell the agent to re-read every output, and asking for the headings back gives you a quick proof that the file holds what you expect.
This is the one most businesses get the most from.
Use the microsoft-office skill with docx_template.py.
Template: ~/templates/welcome-letter.docx
For each row in ~/clients/new-clients.csv, fill the template tokens
and save a new file per client in ~/letters/ (never overwrite the template).
If LibreOffice is installed, also export each one to PDF.
List every output path in your reply.
Listing the paths is deliberate.
On a messaging platform, the Deliverable Mode docs explain that the gateway picks those paths out of the reply and uploads the files as attachments.
🔥 Want these prompts already wired into an Agent OS?
The AI Profit Boardroom gives you step-by-step video trainings, the installable Agent OS, four coaching calls a week and 3,400+ members sharing their own prompts.
Use the microsoft-office skill. Load the PowerPoint reference.
Build a six-slide deck from ~/templates/brand.pptx with pptx_from_template.py:
title, problem, three results slides, next steps. Add speaker notes.
Render it with pptx_render.py and check each slide image with vision_analyze.
Fix anything that overflows, then send me the final .pptx.
Rendering needs LibreOffice plus poppler for the PNGs.
Any font the host lacks is replaced with a stand-in, so put your brand fonts on the machine the agent uses before you trust the render.
Use the microsoft-office skill. Load the Excel reference.
Convert ~/exports/weekly-sales.csv into a styled workbook with csv_to_xlsx.py.
Add a Summary sheet with totals per product and a chart.
Run xlsx_read.py --formulas to list the formulas you wrote,
then run xlsx_recalc.py so the totals show as values.
That recalc step is the one people skip.
Nothing in the skill computes formulas, so values only appear when Excel opens the file or the recalc helper runs.
Use the microsoft-office skill. Load the Word reference and
references/revisions-and-comments.md.
Open ~/contracts/supplier-v2.docx. List every tracked change and comment
with docx_revisions.py and docx_comments.py, in a short table.
Do not accept or reject anything yet. Wait for my decision.
Keeping the decision with you is the safe default for anything contractual.
If you later ask the agent to accept changes, have it run docx_validate.py afterwards; the docs expect exit code 0.
It helps to know the order the skill follows, because your prompts work best when they match it.
The agent identifies the format from the file extension or your wording, then loads that format's reference with skill_view.
It sets the Python interpreter once per session, using the documents environment.
It creates, edits or reads the file with that format's helpers, passing an output path to keep the original whenever the helper allows it.
Finally it verifies the result as the reference describes and hands you the exact output path.
Each helper prints JSON and exits non-zero on failure, so if a step breaks, ask the agent to paste that JSON and you will see which step it was.
The Office skill lists pdf as its related skill, and the PDF skill page lists microsoft-office in return.
Both are bundled, and both use the same shared documents environment, so setting one up sets up the other.
The split of work is simple.
Use the Office skill for .docx, .pptx and .xlsx files, and for turning those into PDFs with LibreOffice.
Use the PDF skill when the job starts or ends in a PDF itself: creating one from a structured spec, pulling text or tables out, merging, splitting, watermarking or filling forms.
A common chain in an Agent OS is a Word report built by the Office skill, exported to PDF, then stamped or merged with other pages by the PDF skill.
soffice --headless --convert-to before working on them.These all come straight from the skill's pitfalls and procedure sections, so you are only reinforcing what the skill already knows.
For other skills worth enabling next to this one, see the best Hermes Agent skills.
🔥 Want a second opinion on which documents to automate first?
Book a free SEO strategy session and my team will look at your weekly paperwork with you.
Monday: Prompt 4 on last week's sales export.
Midweek: Prompt 2 for any new clients that signed.
Friday: Prompt 3 for the weekly update deck, then Prompt 1 for the written summary.
Whenever a contract comes back: Prompt 5, then your decision.
Brief it all from your phone through the gateway, and the files come back in the same chat.
This is one of the most practical bundled skills to switch on.
It turns repeat paperwork into prompts, checks its own output, and needs nothing from Microsoft on the machine.
Add LibreOffice if you send PDFs or need live formula values, and lock the skill once it matches your house style.
Start with the prompt that replaces your most repeated document, run it for a fortnight, then add the next one.
Keep a person on the final sign-off for anything a client will read, and let the agent handle the building and the checking.
Nothing to install separately: the microsoft-office skill is bundled. Ask any profile for a Word, PowerPoint or Excel file and name the output path.
No. The skill writes files offline with python-docx, python-pptx and openpyxl. LibreOffice is only for PDFs, recalculation and slide renders.
v0.23.0 merged them into one microsoft-office skill on 5 November 2026, but an upgrade leaves the old copies on disk until you delete them.
Only after converting it. Run soffice --headless --convert-to xlsx on the file first, then point the agent at the new copy.
Run the agent behind a messaging gateway and ask it to list the output paths. The gateway uploads those files as native attachments.
Yes. docx_template.py fills the tokens in your Word template; ask it to save one new file per client so the template stays untouched.
Paste Prompt 2 into your agent today, add LibreOffice if you need PDFs, and if you want help with the rest, book a free SEO strategy session or bring it to the AI Profit Boardroom and put hermes agent microsoft office to work.
About Julian
I'm Julian Goldie, an AI entrepreneur, SEO expert and the founder of the AI Profit Boardroom, which has 3,400+ members.
I help business owners scale with AI agents, automation and SEO.
My YouTube channel has 400,000+ subscribers, and I run Goldie Agency, a seven-figure SEO agency.
→ The Best Hermes Agent Plugins: My Top 10, And Where Each One Fits In Your Agent OS
→ Hermes Agent Kanban Orchestrator: Run It In Your Agent OS
→ Hermes Agent Cron Job: Schedule, Stop And Recover Jobs In Your Agent OS With 5 Copy-Paste Prompts
→ Hermes Delegation: Run Parallel Subagents In Your Agent OS With 5 Copy-Paste Prompts
The installable system behind every guide on this site — dashboard, agents, memory and pipelines — updated as new tools land, with 3,400+ members and four coaching calls a week.
Join the AI Profit Boardroom →📺 Video notes + links to the tools 👉
🎥 Learn how I make these videos 👉